Model：HCT-UHFR-10804-B
Size：160mmx186mmx50mm
Weight: 2300g

GENERAL DESCRIPTION
HCT-UHFR-10804 is a high performance UHF RFID integrated reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, and anti-counterfeit and industrial production process control system.

FEATURES
Self-intellectual property;
 Support ISO18000-6B, ISO18000-6C(EPC C1G2) protocol tag;
 902~928MHz or 865-868MHZ frequency band(frequency customization optional);
 FHSS or Fix Frequency transmission;
 RF output power up to 30dbm(adjustable);
 4 TNC antenna port;
 Support auto-running, interactive and trigger-activating work mode;
 Low power dissipation with single +9 DC power supply;
 Support RS232, RS485, TCP/IP. other interface is optional interface;
 Built-in LED, Buzzer, GPIO and Relay
 Provide DLL and Demonstration Software Source code to facilitate further development.

INTERFACE
1. Power (DC JACK)
   No.        Symbol     Comment
   Central   PWR        +9VDC
   Outer    GND          Ground
2. GPIO (DB15 Female)
   No.        Symbol     Comment
   1           Output1   General Output1
   2           Output2   General Output2
   3           Output3   General Output3
   4           Output4   General Output4
   5           Output5   General Output5
   6           Output6   General Output6
   7           Output7   General Output7
   8           Output8   General Output8
   9           TGIN        Trigger input with internal pull-up to 5V through a 10k resistor
   10          R+           R+ of RS485
   11          R-            R- of RS485
   12          GND         Signal Ground
   13          NO           Normal-Open terminal of internal relay
   14          NC           Normal-Close terminal of internal relay
   15          CM           Common terminal of internal relay
3. Serial communication port RS232 (DB9 Male)
   No.         Symbol     Comment
   1            nc             Reserved
   2            TXD          General Output2
   3            RXD          General Output3
   4            nc            Reserved
   5            GND         Ground
   6            nc            Reserved
   7            nc            Reserved
   8            nc            Reserved
   9            nc            Reserved
4. TCPIP network (RJ45)
5. TNC antenna port ANT1~ANT4
6. LED indicator LED1~LED7

CHARACTERISTICS

Absolute Maximum Rating

Electrical and Mechanical Specification

Under TA＝25℃，VCC＝+9V unless specified